BVXKM - APPLAUSE, 10833
- MSDS: BVXKM
- Manufacturer: BALL INDUSTRIES INC
- Product Name: APPLAUSE, 10833
- National Stock Number: 7930-00N054098
Product Identification
Product ID:APPLAUSE, 10833
MSDS Date:01/02/1993
FSC:7930
NIIN:00N054098
MSDS Number: BVXKM
Responsible Party
EL SEGUNDO, CA 90245
US
Emergency Phone: 800-228-5635
Info Phone: 213-772-4131
Cage: 12120
Contractor
Telephone: 213-772-4131
Cage: 12120
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
OSHA PEL N/K
ACGIH TLV: N/K
DIETHYLENE GLYCOL MONOETHYL ETHER
CAS: 111-90-0
RTECS: KK8750000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
AMMONIA (SARA III)
CAS: 7664-41-7
RTECS: BO0875000
Fraction By Weight: <1.0%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM/35 STEL
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
ACRYLIC POLYMER
CAS: 25608-63-7
OSHA PEL N/K
ACGIH TLV: N/K
215 GRAMS/LITER
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:REDNESS, TEARING.
INHAL:NAUSEA, HEADACHE, IRRITATED NASAL PASSAGES.
INGEST:GASTRO-INTESTINAL DISTURBANCES. SKIN:REDNESS, DRYNESS,
IRRITATION. CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES:FLUSH THORO W/WATER, REMOVE ANY CONT LENSES. CONTINUE TO
FLUSH W/WATER FOR @ LEAST 15 MIN. IF SYMP PERSIST, GET MED ATTN.
INHAL:MOVE SUBJECT TO FRESH AIR. IF SYMP PERSISTS, GET MED ATTN.
INGEST:D RINK PLENTY OF H*20 & CONT PHYS & POIS CTL CTR IMMED.
NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. NEVER INDUCE VOMIT IN
UNCON PERSON. SKIN:WASH THORO W/SOAP & WATER. IF IRRIT PERSISTS,
GET MED ATTN.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE BOILING POINT
(212F), POLYMER CAN BURN.
Accidental Release
Spill Release Procedures:MOP UP MATERIAL OR PICK UP W/ABSORBENT MATL.
RINSE WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. FOLLOW
NORMAL HYGIENE PRACTICES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:8.0-8.5.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.01 (WATER =1)
pH:SUPDAT
Solubility in Water:COMPLETE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXTREME TEMPERATURE.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:FOLLOW ALL FEDERAL, STATE, AND LOCAL WASTE
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.